High Pressure Hydraulic Hose

Reinflex’s High Pressure Hydraulic Hoses provide excellent hydraulic response times due to their low volumetric expansion. Unlike some other hose manufacturers, Reinflex offers a TRUE 4 to 1 safety factor on burst pressure. Our thermoplastic hose is lightweight, compact, and won’t deteriorate like rubber hoses. We carry hard to find and custom sizes that will fill in your gaps and prevent your customers from shopping elsewhere. And because CRP is customer service focused, no order is too big or too small, even if you’re ordering just one hose.

High Pressure Hydraulic Hose Features

Low to very high working pressures (up to 10,000 psi)
UV resistant; does not deteriorate
Standard fitting options including NPT, NPSM, and JIC in plated or stainless steel-male (M) or female (F); other fitting types are available
Hose sizes from 5/64” to 1”
Suitable for general hydraulics, bolt torquing, and jacking
Custom colors available
Twin line hoses are welded, not taped or clamped

Markets

Municipalities
Plumbers
Vac-truck OEMs
Contractors
Chemical plants
Oil rigs
Fire/rescue
Bolting specialists
Maintenance crews
Wind farms

Click here to download product information and technical specs. Custom sizes and other coupling capabilities available on all hoses. To place an order or speak with a CRP Representative, call 800.526.4066

1000MK SERIES | Fabric Reinforced Thermoplastic Micro-Bore Hydraulic Hose

High pressure micro-bore hose reinforced with synthetic yarn. Ideal for use with petroleum or synthetic hydraulic fluids and gases. Resistant to most chemicals, paints, and solvents.

CONSTRUCTION
Inner: Seamless Poly Tube
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1002MK	1	5/64 (2.0)	0.2 (5.0)	0.8 (20)	6,825	27,300	0.04	4" to 500'	-40F to +150F
1002MKP	1	5/64 (2.0)	0.2 (5.0)	0.8 (20)	6,890	27,550	0.04	4" to 500'	-40F to +150F
1003MK	1	1/8 (3.0)	0.28 (7.0)	1.6 (40)	5,800	23,200	0.07	4" to 500'	-40F to +150F
1004MKP	1	5/32 (4.0)	0.32 (8.0)	1.4 (35)	5,980	23,925	0.09	4" to 500'	-40F to +150F
1004MK	1	5/32 (4.0)	0.34 (8.6)	1.6 (4.)	6,380	25,520	0.09	4" to 500'	-40F to +150F

1000UKH SERIES | Fabric Braid Reinforced Low Temp Thermoplastic Hydraulic Hose (100R18)

All-purpose medium pressure 100R18 hose that is compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters, as well as many industrial gases. Offers improved flexibility at low temperatures and can be used for lift truck applications. Cover is pin-pricked standard. Specification: SAE 100R18

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Black Abrasion & Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1004UKH	1	3/16 (4.8)	0.38 (9.6)	0.98 (25)	3,000	12,000	0.04	4" to 500'	-67F to +212F*
1006UKH	2	1/4 (6.4)	0.48 (12.2)	1.4 (35)	3,000	12,000	0.06	4" to 500'	-67F to +212F*
1010UKH	2	3/8 (9.5)	0.65 (16.6)	1.8 (45)	3,000	12,000	0.11	4" to 500'	-67F to +212F*
1013UKH	2	1/2 (12.7)	0.91 (23.1)	2.8 (70)	3,000	12,000	0.20	4" to 500'	-67F to +212F*
1020UKH	2	3/4 (19.1)	1.24 (31.4)	5.1 (130)	3,000	12,000	0.33	4" to 500'	-67F to +212F*
*+158F for water based fluids

1100UKH SERIES | Fabric Reinforced Thermoplastic Hydraulic Hose (100R7)

All-purpose medium pressure 100R7 hose that is compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters, as well as many industrial gases. Excellent flexibility and flex fatigue resistance. Cover is pin-pricked standard. Specification: SAE 100R7

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Abrasion & Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1104UKH	1	3/16 (4.8)	0.41 (10.4)	1.5 (38)	3,000	12,000	0.05	4" to 500'	-40F to +212F*
1106UKH	1	1/4 (6.4)	0.49 (12.4)	2.0 (51)	2,750	11,000	0.07	4" to 500'	-40F to +212F*
1110UKH	1	3/8 (9.5)	0.64 (16.3)	2.5 (64)	2,250	9,000	0.1	4" to 500'	-40F to +212F*
1113UKH	1	1/2 (12.7)	0.78 (19.9)	3.2 (82)	2,000	8,000	0.14	4" to 500'	-40F to +212F*
1120UKH	1	3/4 (19.1)	1.03 (26.1)	7.0 (178)	1,250	5,000	0.2	4" to 300'	-40F to +212F*
1125UKH	1	1 (25.4)	1.28 (32.5)	8.0 (203)	1,000	4,000	0.25	4" to 300'	-40F to +212F*
* +158F for water based fluids

1200UKH SERIES | Fabric Reinforced Thermoplastic Hydraulic Hose (100R8)

All-purpose medium pressure 100R8 hose that is compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters, as well as many industrial gases. Excellent flexibility and flex fatigue resistance. Cover is pinpricked standard. MSHA cover available upon request. Specification: SAE 100R8

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1204UKH	1	3/16 (4.8)	0.35 (8.9)	1.2 (31)	5,000	20,000	0.04	4" to 500'	-40F to 212F
1206UKH	1	1/4 (6.4)	0.45 (11.4)	2.0 (51)	5,000	20,000	0.06	4" to 500'	-40F to 212F
1210UKH	1	3/8 (9.5)	0.61 (15.5)	2.4 (61)	4,000	16,000	0.09	4" to 500'	-40F to 212F
1213UKH	1	1/2 (12.7)	0.78 (19.8)	3.2 (82)	3,500	14,000	0.14	4" to 500'	-40F to 212F
1220UKH	1	3/4 (19.1)	1.06 (26.9)	6.0 (152)	2,300	9,200	0.21	4" to 300'	-40F to 212F
1225UKH	1	1 (25.4)	1.35 (34.3)	8.0 (203)	2,000	2,000	0.31	4" to 300'	-40F to 212F
*+158F for water based fluids

1000UKTH Series | Fabric reinforced Low Temp Thermoplastic Hydraulic Twin Hose (100R18)

All-purpose medium pressure 100R18 hose that is compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters, as well as many industrial gases. Offers improved flexibility at low temperatures and can be used for lift truck applications. Cover is pin-pricked standard.

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Black Abrasion & Chemical Resistant Polyurethane Cover

Coupling capabilities NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1004UKTH	1	3/16 (4.8)	0.38 (9.6)	0.98 (25)	3,000	12,000	0.04	4" to 500'	-67F to +212F*
1006UKTH	2	1/4 (6.4)	0.48 (12.2)	1.4 (35)	3,000	12,000	0.06	4" to 500'	-67F to +212F*
1010UKTH	2	3/8 (9.5)	0.65 (16.6)	1.8 (45)	3,000	12,000	0.11	4" to 500'	-67F to +212F*
1013UKTH	2	1/2 (12.7)	0.91 (23.1)	2.8 (70)	3,000	12,000	0.2	4" to 500'	-67F to +212F*
* +158F for Water based fluids

1100UKTH SERIES | Fabric reinforced Low Temp Thermoplastic Hydraulic Twin Hose (100R7)

All-purpose medium pressure 100R7 hose that is compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters, as well as many industrial gases. Excellent flexibility and flex fatigue resistance. Cover is pin-pricked standard.

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Black Abrasion & Chemical Resistant Polyurethane Cover

Coupling capabilities NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1104UKTH	1	3/16 (4.8)	0.41 (10.4)	1.5 (38)	3,000	12,000	0.05	4" to 500'	-40F to +212F*
1106UKTH	1	1/4 (6.4)	0.49 (12.4)	2.0 (51)	2,750	11,000	0.07	4" to 500'	-40F to +212F*
1110UKTH	1	3/8 (9.5)	0.64 (16.3)	2.5 (64)	2,250	9,000	0.1	4" to 500'	-40F to +212F*
1113UKTH	1	1/2 (12.7)	0.78 (19.9)	3.2 (82)	2,000	8,000	0.14	4" to 500'	-40F to +212F*
* +158F for water based fluids

1200UKTH SERIES | Fabric reinforced Thermoplastic Hydraulic Twin Hose (100R8)

All-purpose medium pressure 100R8 hose that is compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters, as well as many industrial gases. Excellent flexibility and flex fatigue resistance. Cover is pin-pricked standard.

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Abrasion and Chemical Resistant Polyurethane Cover

Coupling capabilities NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1204UKTH	1	3/16 (4.8)	0.35 (8.9)	1.2 (31)	5,000	20,000	0.04	4" to 500'	-40F to 212F*
1206UKTH	1	1/4 (6.4)	0.45 (11.4)	2.0 (51)	5,000	20,000	0.06	4" to 500'	-40F to 212F*
1210UKTH	1	3/8 (9.5)	0.61 (15.5)	2.4 (61)	4,000	16,000	0.09	4" to 500'	-40F to 212F*
1213UKTH	1	1/2 (12.7)	0.78 (19.8)	3.2 (82)	3,500	14,000	0.14	4" to 500'	-40F to 212F*
* +158F for water based fluids

1000UKT SERIES | Wire Reinforced Twin Line Thermoplastic Hydraulic Hose

High pressure, high performance twin line hose reinforced with a steel braid. Guaranteed electrical conductivity. Resistant to a wide range of paints, chlorinated solvents, and other chemicals. Extremely durable. Cover is pinpricked standard.

CONSTRUCTION
Inner: Seamless Nylon 6 Liner
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1006UKT	1	1/4 (6.4)	0.46 (11.7)	1.5 (37)	5,000	18,000	0.22	4" to 200'	-40F to +212F
1010UKT	1	3/8 (9.5)	0.60 (15.1)	2.0 (50)	3,500	13,000	0.3	4" to 200'	-40F to +212F
1013UKT	1	1/2 (12.7)	0.72 (18.3)	3.0 (75)	3,000	12,000	0.4	4" to 200'	-40F to +212F

1000UKNC SERIES | Fabric Braid Reinforced Thermoplastic Hydraulic Hose

All-purpose medium pressure non-conductive hose reinforced with a single braid of polyester fiber. Ideal where non-conductivity is required. Suitable for grease, fuel oils, mineral oils, and phosphate esters. Excellent flexibility and flex fatigue resistance.

CONSTRUCTION
Inner: Polyester Elastomer
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1004UKNC	1	3/16 (4.8)	0.41 (10.4)	1.5 (38)	3,000	12,000	0.05	4" TO 500'	-40F to +212F*
1006UKNC	1	1/4 (6.4)	0.49 (12.4)	2.0 (51)	2,750	11,000	0.07	4" TO 500'	-40F to +212F*
1010UKNC	1	3/8 (9.5)	0.64 (16.3)	2.5 (64)	2,250	9,000	0.10	4" TO 500'	-40F to +212F*
1013UKNC	1	1/2 (12.7)	0.78 (19.9)	3.2 (82)	2,000	8,000	0.14	4" TO 300'	-40F to +212F*
1020UKNC	1	3/4 (19.0)	1.03 (26.1)	7.0 (178)	1,250	5,000	0.20	4" TO 200'	-40F to +212F*
1025UKNC	1	1 (25.4)	1.28 (32.5)	8.0 (203)	1,000	4,000	0.25	4" TO 200'	-40F to +212F*
*+158F for water based fluids

1000UKTNC SERIES | Fabric Reinforced Twin Line Thermoplastic Hydraulic Hose

All-purpose medium pressure non-conductive twin line hose reinforced with a single braid of polyester fiber. Ideal where non-conductivity is required. Suitable for grease, fuel oils, mineral oils, and phosphate esters. Excellent flexibility and flex fatigue resistance.

CONSTRUCTION
Inner: Inner: Polyester Elastomer Liner
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	Colors	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
1010UKTNC	/	1	3/8 (9.5)	0.64 (16.3)	2.5 (64)	2,250	9,000	0.2	4" to 200'	-40F to +212F*
1013UKTNC	/	1	1/2 (12.7)	0.78 (19.9)	3.2 (82)	2,000	8,000	0.28	4" to 200'	-40F to +212F*
*+158F for water based fluids

2000UKNC SERIES | Fabric Braid Reinforced Thermoplastic Hydraulic Hose

All-purpose medium pressure non-conductive hose reinforced with a single braid of polyester fiber. Ideal where non-conductivity is required. Suitable for grease, fuel oils, mineral oils, and phosphate esters. Excellent flexibility and flex fatigue resistance.

CONSTRUCTION
Inner: Polyester Elastomer Liner
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2004UKNC	1	3/16 (4.8)	0.41 (10.4)	1.5 (38)	5,000	20,000	0.05	4" to 500'	-40F to +212F*
2006UKNC	1	1/4 (6.4)	0.49 (12.4)	2.0 (51)	5,000	20,000	0.07	4" to 500'	-40F to +212F*
2010UKNC	1	3/8 (9.5)	0.63 (15.9)	2.5 (64)	4,000	16,000	0.1	4" to 500'	-40F to +212F*
2013UKNC	1	1/2 (12.7)	0.78 (19.9)	3.2 (82)	3,500	14,000	0.13	4" to 300'	-40F to +212F*
2020UKNC	1	3/4 (19.1)	1.04 (26.5)	5.91 (150)	2,300	9,200	0.24	4" to 200'	-40F to +212F*
*+158F for water based fluids

2000UKTNC SERIES | Fabric Reinforced Twin Line Thermoplastic Hydraulic Hose

All-purpose high pressure non-conductive twin line hose suitable for many hydraulic and pneumatic systems. Reinforced with a single braid of polyaramid fiber. Compatible with hydraulic oils, mineral oils, phosphate esters, and many industrial gases. Excellent flexibility and flex fatigue resistance. Specification: SAE 100R8

CONSTRUCTION
Inner: Polyester Elastomer Liner
Outer: Abrasion Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	Colors	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2006UKTNC	/ / / /	1	1/4 (6.4)	0.46 (11.7)	2.0 (51)	5,000	20,000	0.14	4" to 200'	-40F to +212F*
2010UKTNC		1	3/8 (9.5)	0.63 (15.9)	5.0 (127)	4,000	16,000	0.2	4" to 200'	-40F to +212F*
* +158F for water based fluids

2000UK SERIES | Wire Reinforced Thermoplastic Hydraulic Hose

A high pressure, high performance Airless Paint Spray Hose with steel braid reinforcement for strength and guaranteed electrical conductivity. Offers optimum resistance to a wide range of paints, chlorinated solvents, and other chemicals. Extremely durable. Cover is pin-pricked standard.

CONSTRUCTION
Inner: Seamless Nylon 6 Liner = 2006/2010/2013
Seamless Nylon 12 Liner = 2020/2025
Outer: Abrasion and Chemical Resistant Polyurethane Cove

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	Colors	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2025UK		3	1 (25.4)	1.46 (37.1)	10.0 (254)	4,750	19,000	19,000	4" up to 300'	-40F to +212F*
*+158F for water based fluids

2100UK SERIES | Wire & Fabric Reinforced Thermoplastic Hydraulic Hose

High pressure, high performance hydraulic hose reinforced with a braid of steel and a polyaramid yard. Compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters. Superior flexibility and bend radii.

CONSTRUCTION
Inner: Polyester Elastomer Liner
Outer: Abrasion Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	Colors	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2106UK	/ / /	2	1/4 (6.4)	0.54 (13.7)	1.5 (38)	10,000	40,000	0.15	4" to 500'	-40F to +212F
2110UK		2	3/8 (9.5)	0.74 (18.8)	3.8 (95)	10,000	40,000	0.24	4" to 300'	-40F to +212F

2100UKN SERIES | Wire & Fabric Reinforced Thermoplastic Hydraulic Hose

High pressure, high performance Airless Paint Spray Hose with steel and Kevlar braid reinforcement to ensure mechanical strength. Superior resistance to most paints, chemicals, and solvents. Cover is pin-pricked standard.

CONSTRUCTION
Inner: Seamless Nylon 12 Liner
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2113UKN	2	1/2 (12.7)	0.82 (20.8)	5.0 (127)	6,500	26,000	0.28	4" to 300'	-40F to +212F*
2120UKN	3	3/4 (19.1)	1.16 (29.5)	8.0 (203)	6,500	26,000	0.45	4" to 300'	-40F to +212F*
*+158F for water based fluids

2100UKT SERIES | Wire & Fabric Reinforced Twin Line Thermoplastic Hydraulic Hose

High pressure, high performance hydraulic hose reinforced with a braid of steel and a polyaramid yard. Compatible with hydraulic oils, grease, fuel oils, mineral oils, and most phosphate esters. Superior flexibility and bend radii.

CONSTRUCTION
Inner: Polyester Elastomer Liner
Outer: Abrasion Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	Colors	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2106UKT		2	1/4 (6.4)	0.54 (13.7)	1.5 (38)	10,000	40,000	0.3	4" to 200'	-40F to +212F
Other colors available on request.

2100UKNC SERIES | Fabric Reinforced Thermoplastic Hydraulic Hose

All-purpose high pressure non-conductive hose suitable for many hydraulic and pneumatic systems. Reinforced with two braids of polyaramid fiber. Compatible with hydraulic oils, grease, fuel oils, mineral oils, phosphate esters, and many industrial gases. Excellent flexibility and flex fatigue resistance.

CONSTRUCTION
Inner: Polyester Elastomer Liner
Outer: Abrasion Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2104UKNC	2	3/16 (4.8)	0.43 (10.9)	1.2 (30.5)	10,000	40,000	0.06	4" to 300'	-40F to +212F*
2106UKNC	2	1/4 (6.4)	0.57 (14.5)	1.5 (38)	10,000	40,000	0.11	4" to 200'	-40F to +212F*
2110UKNC	2	3/8 (9.5)	0.54 (13.7)	2.76 (70.1)	8,000	32,000	0.13	4" to 300'	-40F to +212F*
*+158F for water based fluids

2100TNC SERIES | Fabric Reinforced Twin Line Thermoplastic Hydraulic Hose

All purpose high pressure non-conductive hose suitable for many hydraulic and pneumatic systems. Reinforced with two braids of polyamide fiber. Compatible with hydraulic oils, grease, fuel oils, phosphate esters, and many industrial gases. Excellent flexibility and flex fatigue resistance.

CONSTRUCTION
Inner: Polyester Elastomer Liner
Outer: Abrasion Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2104TNC	2	3/16 (4.8)	0.43 (10.9)	1.2 (30.5)	10,000	40,000	0.15	4" to 300'	-40F to +212F*
2106TNC	2	1/4 (6.4)	0.57 (14.5)	1.5 (38)	10,000	40,000	0.24	4" to 300'	-40F to 212F*
*+158F for water based fluids

2100RH SERIES | Wire Reinforced Rubber Hydraulic Hose

All purpose high pressure rubber hose for many hydraulic and pneumatic systems. Reinforced with two braids of high tensile wire. Compatible with hydraulic oils, grease, fuel oils, phosphate esters, and many industrial gases. Excellent flexibility and flex fatigue resistance.

CONSTRUCTION
Inner: Synethic Rubber
Outer: Abrasion Resistant Rubber Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
2106RH	2	1/4 (6.4)	0.58 (14.7)	4.0 (101.6)	10,000	20,000	0.27	4" to 300'	-40F to +212F*
2110RH	2	3/8 (9.5)	0.71 (18.0)	4.0 (101.6)	10,150	20,300	0.32	4" to 300'	-40F to +212F*
*+158F for water based fluids

3000UK SERIES | Wire & Fabric Reinforced Thermoplastic Hydraulic Hose

High pressure, high performance Large Bore Airless Paint Spray Hose with steel braid reinforcement to ensure superior resistance to most chemicals, paints, and solvents. Cover is pin-pricked standard.

CONSTRUCTION
Inner: Seamless Nylon 12 Liner
Outer: Abrasion and Chemical Resistant Polyurethane Cover

COUPLING CAPABILITIES: NPT, NPSM, JIC Plated or Stainless Steel – M or F

Part Number	# of Braids	ID (in/mm)	OD (in/mm)	Bend Radius	WP (PSI)	BP (PSI)	Weight (lbs/ft)	Max Length	Temp Range
3013UK	3	1/2 (12.7)	0.90 (22.9)	5.0 (127)	8,500	34,000	0.33	4" to 300'	-40F to +212F*
3113UK	3	1/2 (12.7)	0.90 (22.9)	5.0 (127)	10,000	34,000	0.33	4" to 300'	-40F to +212F*
*+158F for water based fluids

Can't find what you're looking for?Give us a call at 800.526.4066.

Products Catalogs and Sheets

Reinflex Full Catalog

Download

Reinflex Airless Paint Spray Catalog

Download

Reinflex UHP Catalog

Download

FAQ

If you have any queries regarding ordering, sizing of hoses, and type of motors, glance through our answers for common queries.

Read

Literature

Browse through our various spec sheets and catalogs, to find which suits you the best.